2Versions:CMXDL+-黑白屏幕CMXDLP-C-彩色屏幕ThenewDakotaCMXDL+isthetop-of-the-linemodelintheCMXSeriesofGaugesthatmeasuresbothcoatingandwallthicknessquicklyandaccurately—fromonlyoneside

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：260

產品咨詢 13352927502

詳細介紹在線留言

2 Versions:

CMXDL+ - 黑白屏幕

CMXDLP-C - 彩色屏幕

The new Dakota CMXDL+ is the top-of-the-line model in the CMX Series of Gauges that measures both coating and wall thickness quickly and accurately—from only one side. In addition, when switched to Pulse-Echo mode, the CMXDL+ automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting—without removing the coating.

美國Dakota CMXDL+超聲波測厚儀可以同時快速精準測量材料的涂層和壁厚。當測厚儀切換到脈沖-回波模式是，CMXDL+可自動穿透涂層，測量材料凈壁厚，這樣使用者無需清除涂層而精準探測到被測材料上的腐蝕和凹陷。

It features an A-Scan Display Mode allowing the user to see the actual wave form echoes, graphically, providing the insight necessary to tune the settings on the gauge for optimal performance. This is especially important on challenging measurement tasks. The CMXDL+ also features a new E-EV Operating Mode ("Echo-Echo-Verify"), also known as Triple-Echo Mode, which provides addition assurance that the displayed measurement is accurate and fully verified by subsequent echoes.

CMXDL+在CMXDL上增加了A掃描模式，使得用戶撿到圖片的形式的，真實的波形回聲，這樣用戶可在必要的時候調成設置，保證測量狀態。CMXDL+新增了E-EV操作模式，也就是熟知的三重回波模式，提供多重保障，通過并發的回波來保證測量的精準全面。

Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring).

自帶的大尺寸LCD屏幕使得用戶可以清晰閱讀字體，圖形和顯示代碼。所有的關鍵設置信息盡收眼底，包括速度、操作模式，報警和掃描模式等信息。CMXDL屏幕背光可設置為一直開啟、一直關閉或者自動（測量時開啟）。RS-232輸出，將數據傳輸給打印機和電腦，標配數據采集和分析軟件。

Five user-selected operating modes are included:

Coating On: Measures wall thickness using Pulse-Echo. It separately displays wall & coating thickness.

Coating Off: Measures wall thickness using Pulse-Echo. It displays wall thickness only.

Temperature Compensated: Measures wall thickness using Pulse-Echo and automatically adjusts calibration to compensate for changes in material temperature.

Thru-Coat: Measures wall thickness only using Echo-Echo. (coating is NOT included)

Coating Only Mode (CT): (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.013 to 2.540 mm). Range will vary slightly depending on the coating.

5個可選的操作模式

涂層開啟測量模式：通過脈沖-回波模式測壁厚，屏幕會分別顯示壁厚和涂層值

涂層關閉測量模式：通過脈沖-回波模式測壁厚，屏幕只會顯示壁厚值

溫度補償測量模式：通過脈沖-回波模式測壁厚時，會隨著材料的溫度變化而自動標定，相應的進行溫度補償

透過涂層測量模式：只要通過回波-回波模式才可測凈壁厚

涂層測量模式：僅僅測量涂層，測量范圍：0.013-2.540mm

在CMXDL超聲波測厚儀的基礎上，增加了A掃描功能，3個獨立閘門，另有彩色屏幕主機可選

Built-in memory with RS-232 output for transferring data to a Printer or PC
Includes Datacomm Data Transfer & Analysis Software and RS-232 Cable, FREE
Data Files can be user-set for a "grid type" structure where data is formatted in Rows & Columns or a "sequential" file where all data appears in a single column
Each "grid type" File can be set for up to 999 rows by 52 columns
Each "sequential" File can be set for up to 512 rows by 1 column
Each File can be set for "data only" or as "data plus B-scan Graphic". Memory Capacity is over 225,000 data values or over 16,000 data values with B-scan

測量
P-E(脈沖-回波)模式	0.6~508mm
PECT(脈沖-回波涂層)模式	0.6~508mm，涂層0.0127~2.54mm
PETP(脈沖-回波溫度補償)模式	0.6~508mm
E-E(回波-回波)模式	2.54~102mm
E-EV(回波-回波驗證)模式	2.54~102mm
CT(測量涂層)模式	0.0127~2.54mm
分辨率	0.01mm
聲速范圍	1250~13995m/s
單位	公制或英制
顯示
顯示屏	VGA灰色顯示，240x160象素。可視區62x45.7mm，EL背光
顯示屏(彩色)	可選彩色版本主機
A-掃描	檢波+/-(缺陷視場)，RF(全波視場)，三個獨立閘門
B-掃描	穿過斷面視場，顯示速度為每一屏15秒
大數字顯示	標準厚度顯示，17.78mm高
厚度條形掃描	每秒6個讀數，在B-掃描和大數字顯示中可見
超聲波參數
測量模式	P-E/PECT/PETP/E-E/E-EV/CT
脈沖	雙通道方波脈沖
接收	110dB(極限)范圍內采用手動或AGC增益控制，雙通道接收
數據處理
內置存儲器	開啟圖形時，可存儲16000個讀數(每個讀數包括B掃描波形和儀器設置) 關閉圖形時，可存儲21000個讀)
其他
電源	3節5號電池，可用150小時，電池電量顯示，無操作5分鐘后自動自動關機
鍵盤	12個觸摸鍵
外殼	擠壓鋁機殼，底蓋用鍍鎳鋁板加密封墊封裝
工作溫度	-10～60℃
尺寸	63.5x165x31.5mm
重量	含電池385g
質保	2年

訂貨型號

CMXDL+	Dakota CMXDL+ Data-Logging Combination Coating & Wall Thickness Gauge, Z-172-0001
TI-CMXDLP-H	Combination Coating & Wall Thickness Gauge with T-102-2900-H High Temp Probe, up to 300 F (150 °C)
TI-CMXDLP-2225	CMXDL+ Data-Logging Combination Coating & Wall Thickness Gauge with 1/4" 2.25MHz Transducer for thin plastics
TI-CMXDLP-C	Combination Coating & Wall Thickness Gauge kit with Color LCD and T-102-2900 probe

配件

T-102-2900	1/4" diameter, 5.00 MHz, dual element, through-coating transducer
T-104-2900	1/2" diameter, 5.00 MHz Coating Transducer
T-104-9900	1/2" diameter, 3.5 MHz Coating Transducer
T-102-2900-H	1/4" 5Mhz Coating Transducer for Material Temp up to 300 °F (150 °C)
T-212-2001	1/4", 5 MHz Hi-Temp (900 F / 500 C) Transducer
TI-CMX-UW-50	1/2" 5 Mhz Hi Damp Coating Probe with 50 ft. underwater cable
TICC-MVX	Protective Holder for Long Body UT Gauges, F-149-0001
CF12	Coupling Fluid - 12oz
CF-4H-950F	High Temp Coupling Fluid 4oz (600 - 950 F / 316 - 510 C)
V-Block	V-Block Transducer Holder (For 3/16" & 1/4" Transducers only), F-000-7001
QC2525	Shear Wave Transducer 2.25 Mhz .250" Dia
QC3725	Shear Wave Transducer 2.25 Mhz .375" Dia
QC5025	Shear Wave Transducer 2.25 Mhz .500" Dia
PQC5035	Shear Wave Transducer 3.5 Mhz .500" Dia
QC2550	Shear Wave Transducer 5.0 Mhz .250" Dia
QC3750	Shear Wave Transducer 5.0 Mhz .375" Dia
QC5050	Shear Wave Transducer 5.0 Mhz .500" Dia
QC2510	Shear Wave Transducer 10.0 Mhz .250" Dia
QC3710	Shear Wave Transducer 10.0 Mhz .375" Dia
QC5010	Shear Wave Transducer 10.0 Mhz .500" Dia
N-104-0020	LEMO 00 - Microdot Single Probe Transducer Cable, 4 foot length
QW2545	Quick Change Wedges 45° .250" Dia
QW2560	Quick Change Wedges 60° .250" Dia
QW2570	Quick Change Wedges 70° .250" Dia
QW3745	Quick Change Wedges 45° .375" Dia
QW3760	Quick Change Wedges 60° .375" Dia
QW3770	Quick Change Wedges 70° .375" Dia
QW5045	1/2"-45 Deg Angle Acrylic Wedge
QW5060	1/2"-60 Deg Angle Acrylic Wedge
T-8071-0868	1.00", 1.00 Mhz, Side, BNC, Comp
BATT-RC4AA-WC	4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit