精度

± 0.5% Full Scale, ± 1 digit
  (10 - 90% of Full Scale)
  ± 3.0% Full Scale, ± 1 digit
  (Remaining portion of range)

測量頻率

62 measurements/second

感應測量輪偏差

0.2 mm

過載能力

200% of Full Scale

顯示

4位 LCD, 字高12 mm

顯示刷新率

0.5, 1.0, 2.0 or 4.0 seconds, dip-switch   selectable

標準存儲

值，值，最小值，峰值

現場校準調整

± 7 steps, 1.5% per step

電池

Four (4) 1.5 V AA (included)

電池壽命

20 hours, continuous use

自動關閉電源

After 2 minutes of non-use

導向輪材質

Hard Coated (Standard)
  Hardened Steel (ST) (optional)
  Ceramic (CE) (optional)
  Plastic (PL) (optional)

速度

2000 m/min (standard)
  2500 m/min (U)

外殼材質

模鑄鋁制

重量

1.43 lbs. (650 g)

工作溫度

32 to 132 °F (0 to 45 °C)

質保

一年

存儲

100 values plus maximum, minimum,   average, peak, standard deviation and memory location

存儲操作

Continuous Mode: Automatic storage of   each displayed value until memory is full
  On-Demａnd Mode: Displayed value is stored when STORE key is pressed

串口輸出

RS-232C (4800 baud, 8 bit word length, no   parity, 2 stop bits)

模擬輸出

0-1 VDC, proportional to tension range

AC電源

6 VDC @ 300 mA, for continuous in-line   use

注意

* Quoted accuracy can only be gauranteed   on standard factory calibration materials. Because of the wide variety of   customer samples, accuracy may exceed standard tolerances.

DTMX-200

0.1 - 200.0 g

38 mm

1000 Denier

0.15 mm (max)

DTMX-500

0.1 - 500.0 g

38 mm

0.05-0.25mm

0.05-0.25 mm

DTMX-1K

50 - 1000 g

38 mm

0.10 - 0.40 mm

.10 - 0.25 mm

DTMX-2K

200 - 2000 g

38 mm

0.30 - 0.70 mm

0.30 - 0.70 mm

DTMX-2.5KB

250 - 2500 g

100 mm

0.30 - 0.70 mm

0.30 - 0.70 mm

DTMX-5KB

500 - 5000 g

100 mm

0.50 - 1.20 mm

0.40 - 1.00 mm

DTMX-10KB

1.00 - 10.00 Kg

100 mm

0.70 - 1.40 mm

0.70 - 1.20 mm

DTMXL-20KB*

2.00 - 20.00 Kg

200 mm

1.00 - 2.00 mm

1.50 - 1.70 mm

DTMXL-50KB*

5.00 - 50.00 Kg

200 mm

1.50 - 3.00 mm

1.70 - 3.00 mm