數字扭力測定儀，帶遠程探頭，USB輸出，數據采集功能

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：342

產品咨詢 13352927502

詳細介紹在線留言

數字扭力測定儀，帶遠程探頭，USB輸出，數據采集功能。

Checkline DIS-IP Digital Torque Tester with flanged remote sensor calibrates torque tools up to 362 lbf-ft. It has an accuracy of ± .5% F.S., ± 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint. Check-Line DIS-IP

Use the 800 internal memory for peak data recall or USB download for analysis by Imada data acquisition software SW-1SV-USB.

Calibrate your own torque wrenches and electric drivers and ａnd save down time. Do not use with power drivers or impact tools (Ask for DI-1M impact wrench torque tester).

Heavy duty metal construction
lbf-in, kgf-cm, N-cm, or lbf-ft, kgf-m, N-m (see table below)
800 data memory for recall or for SPC download
USB output for SPC capability
Peak, Real Time and Peak Down measuring modes (selectable)
Accuracy: ±0.5% F.S. ±1 LSD (32° to 100°F)
Both clockwise and counterclockwise operation
AC adapter/charger included
Runs on internal NiCad batteries (8 hour use)
Programmable High/Low setpoints with GO/NO GO LED indicators and audible beep

配件

230V 230V Power Supply, No Cost Option supplied inplace of standard 115V

AP-100L L-Plate Mounting Bracket

ISO-17025 Upgrade from 3 point NIST traceable cert to ISO-17025 CertificateSW-1SV-USB Data Acquisition Software for Torque

SS-208 USB output cable (formerly CB-208)

訂貨型號

Model	Capacity	Drive
DIS-IP5	0.20 - 44.00 lbf-in 0.20 - 50.00 kgf-cm 2.0 - 500.0 N-cm 0.020 - 5 N-m	1/4"
DIS-IP50	2.0 - 440.0 lbf-in 2.0 - 500.0 kgf-cm 20 - 5000 N-cm 0.20 - 50.00 N-m	3/8"
DIS-IP200	20 - 1740 lbf-in 2.0 - 145 lbf-ft 0.20 - 20.00 kgf-cm 2.0 - 200.0 N-m	1/2"
DIS-IP500	20 - 4400 lbf-in 2.0 - 362 lbf-ft 0.20 - 50.00 kgf-cm 2.0 - 500.0 N-m	3/4"