歡迎進入深圳市漢斯福特科技有限公司網站！
13352927502
歡迎進入深圳市漢斯福特科技有限公司網站！
13352927502
Product Center
產品簡介
扭力螺絲刀緊固件的聯結質量直接影響到各種儀器儀表、機電設備、家用電器等產品的使用質量至這些產品的可靠程度。所以扭力螺絲刀等扭力工具在工業生產中也逐漸被使用的越來越多了。
扭力螺絲刀用于檢測已固定在物體上的螺絲或螺帽的松緊程度，測量螺絲或螺帽旋入或旋出時的扭力。有跟隨模式，實時模式和峰值保持模式，測量正反方向扭力。
2 Models
DID-05: Capacity: 4.500 lb-in / 50.00 N-cm
DID-4A:Capacity: 35.00 lb-in / 400.0 N-cm
The DID is a torque measuring manual screwdriver designed for lab and production use. The large LCD display measures bi-directional torque in real-time or peak modes. USB data output allows the user to graph torque vs time with optional SW-1SD software.
The DID has an accuracy of ± 0.5% F.S., ±1 LSD and has programmable setpoints that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Optional ratcheting clutch allows for convenient tightening or loosening. Use the 800 internal memory for data recall or USB download for SPC.
The DID substantially reduces scrap and rework costs by eliminating over and under-tightening and is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies.
Includes NIST Traceable Calibration Certificate, ISO-17025 Cert Optional
Peak, Real Time and Peak Down measuring mode (selectable)
Statistics: number of data, Max, Min, Avg
Programmable screw tightening counter
DID-4 uses standard 1/4" bits, DID-05 uses 4mm hex bits.
Selectable units ozf-in, lbf-in, kgf-cm, N-cm and N-m
Runs on internal NiCad batteries (8 hour use) Auto shut-off after 10 min. of non-use
Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
USB?virtual COM?port sends peak (1 data) or continuous data (12 or 180 data/second)
800 data memory for recall or for SPC download
Programmable Auto Zero function resets unit to zero for easy operation
2 Phillips tips, AC charger and carrying case included
2-Year Warranty
Accuracy | +/- 0.5% F.S., +/- 1 LSD |
Display | 4 digit LCD |
Operation | CW, CCW and fixed position (DID-4 Only) |
Measuring Modes | |
PP | Peak Mode displays PEAK torque value that will not change until a higher value is measured |
PD | Peak Down Mode Captures first peak down value above the PDLO |
Real Time | Displays transient torque values |
C | Real-time Output 180 data per second |
GO/NO GO testing | Programmable High and Low setpoints with both audible beep and Green/Red LED indicator |
Statistics | Number of data, maximum, minimum and average |
Data Transfer | ASCII, 19200 bps, USB miniB cable |
Data Memory | 800 data |
Batch Counter | 1-99 (CW only) |
Power Supply | Ni-Cad rechargeable batteries 1.2V×4cells 600mAh |
Auto Power Save | Automatic switch off after 10 minutes of non-use |
Charging Time | From empty - less than 5hours |
Working Time | 12 hours continuous use |
Accessories | AC/DC Adapter/Charger, 100~230VAC, 2 Phillips bits, NIST certificate |
Warranty | 2-Years |
訂貨型號
DID-4A | Digital Torque Screwdriver, 35 lb-in / 4Nm Capacity |
DID-4A-ISO | Digital Torque Screwdriver, 35 lb-in / 4Nm Capacity with ISO-17025 Calibration Cert |
DID-05 | Digital Torque Screwdriver, 4.5 lb-in / 50 N-cm Capacity |
DID-05-ISO | Digital Torque Screwdriver, 4.5 lb-in / 50 N-cm Capacity with ISO-17025 Calibration Cert |
配件
SW-1SV-USB | Data Acquisition Software for DID-4 Torque Screwdriver |
SS-209 | USB Output Cable for DID Torque Screwdriver |
3A-066WP12-120 | Spare / Replacement Power Adapter from DID-4 |
RA2 | Ratchet Clutch for use with DID-4A Torque Screwdriver |
相關型號
TSD 扭力螺絲刀起子
GLK 數顯螺絲刀
TT03 數字式扭矩儀
SW-1SV-USB 扭力值數據采集軟件
相關文章
當前位置：
上一個：
返回列表
產品分類